ENFORCER Gigabit PoE Extenders
2
SECO-LARM U.S.A., Inc.
The ENFORCER Gigabit PoE Extenders connects PoE cameras, IP access control, IP telephony,
IP speakers/intercoms, or other PoE devices using a single Cat5e or Cat6 cable to extend its data
and power range by an additional 328ft (100m). The NR-P401E-TQ supports up to 4 PoE devices.
1x PoE Extender*
2x Wall-mount brackets
2x Wall mounting screws
2x Plastic wall anchors
4x Extender bracket mounting screws
1x Manual*
*NR-P101E-TQ includes only the PoE extender with end caps and manual
Model
NR-P101E-TQ
NR-P401E-TQ
Connections
PoE In
1x Weather-resistant RJ-45
1x Shielded RJ-45
PoE Out
1x Weather-resistant RJ-45
4x Shielded RJ-45
PoE Power
Input
Up to 30W
Up to 60W
Output
Up to 25W
Up to 55W (total for 4 ports)
Transmission
range*
1 Extender
656ft (200m)
656ft (200m)
2 Extenders
984ft (300m)
984ft (300m)
Data link
Both pin 1/2, 3/6 and 4/5, 7/8
Power link
Pin 1/2(+), 3/6(–)
up to 25W
Pin 1/2(+), 3/6(–)
up to 12W for 4 PSE, 25W for 2 PSE
Network cables
Weather-resistant Cat-5e or higher
Shielded Cat-5e or higher
Ethernet speed
10/100/1000 Mbps half/full duplex
PoE standard
IEEE 802.3af, IEEE 802.3at
IEEE 802.3af, IEEE 802.3at,
IEEE 802.3bt 4 pairs (60W)
LED
Indicators
Power link
None
Yellow
Data link
Green, steady
Data Transmit
Green flashing
IP rating
IP66 (with weather-resistant UTP cable)
None
†
Operating humidity
90% (maximum, non-condensing)
Operating temperature
-13°~101° F (-25°~55° C)
14°~113° F (-10°~45° C)
Dimensions
7
1
/
4
"x1
3
/
4
"x1
3
/
4
" (185x45x45 mm)
‡
4
11
/
16
"x1
1
/
8
"x3
3
/
8
" (119x28x85 mm)
Weight
8-oz (227g)
8.8-oz (250g)
*The maximum range depends on the actual operating conditions, PoE device power requirements, and the type of PoE
device. Cat5e/6 Ethernet cables are recommended.
†
The NR-P401E-TQ can be used outdoors with an IP66 sealed box and weather-resistant UTP cables
‡
Including endcaps
Specifications:
Introduction:
Parts List:
