4K HDMI 1x4 Splitter/Extender over Cat6
IMPORTANT:
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws and statutes related to
monitoring and recording audio and video signals. SECO-LARM
will not be held responsible for the use of this product in violation of any current laws or statutes.
California Proposition 65 Warning:
These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information, go to
www.P65Warnings.ca.gov
.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1) year from the date of sale
to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to
SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper
or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other
than defects in material and workmanship. The sole obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair
only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damage of any
kind to the purchaser or anyone else.
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO LARM reserves the right to change specifications without
notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2022
SECO-LARM U.S.A., Inc. All rights reserved.
Sample Application
Troubleshooting
HDMI device does not
function correctly
Use T-568B wiring standard
Make sure the extender is powered
Make sure the source and the display are powered
Test the Cat6 cable between the receiver and transmitter and make sure it
is functional
Make sure that there are no problems with the HDMI source, HDMI cables,
or HDMI display by plugging the source directly into the display using an
HDMI cable
Screen flickering or brief
image loss
Use a higher grade of twisted pair category cable (Cat6 is recommended)
Switch the source device to a lower HDMI output (i.e., 4K@30Hz to 1080p)
Restart the handshake process by powering everything down then powering
up and connecting each device in succession starting with the HDMI source
Local HDMI
Display
HDMI
Display
HDMI
Display
HDMI Source
Cable Legend
Power
HDMI
Cat6
IR
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
PICHN3
MI_MVE-AH1E4-42NQ_220329.docx
HDMI
Display
HDMI
Display
