ENFORCER HDMI
®
Extender over Single Cat5e/6
8
SECO-LARM U.S.A., Inc.
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO-LARM.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is
not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO
-
LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
SECO-LARM
®
U.S.A., Inc
.
16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com
PICHN3
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
MVE-AH030Q_1405.docx
Troubleshooting:
HDMI device does not function
correctly
•
Use T568-B wiring standard
•
Make sure the extender is powered on both sides.
•
Make sure the source and the display are powered.
•
Test the Cat5e/6 cable between the receiver and
transmitter and make sure it is functional.
•
Make sure that there are no problems with the HDMI
source, HDMI cables, or HDMI display by plugging the
source directly into the display using an HDMI cable.
Screen flickering or brief image loss
•
Use a higher grade of twisted pair category cable.
•
Switch the source device to a lower HDMI output
(1080p to 1080i).
A/V Receiver (or sound bar) is not
outputting the correct audio
•
Ensure the source device supports ARC.
•
Make sure CEC is activated on the source device.
Also Available from SECO-LARM:
High-Speed HDMI Cables
MC-1102-18NQ
1.5ft (0.5m), 28AWG
MC-1102-03FQ
3ft (1m), 28AWG
MC-1102-06FQ
6m (1.83m), 28AWG
MC-1102-10FQ
10ft (3m), 28AWG
MC-1102-16FQ
16ft (5m), 28AWG
MC-1102-20FQ
20ft (6m), 26AWG
MC-1102-25FQ
25ft (7.6m), 26AWG
MC-1102-30FQ
30ft (9m), 26AWG
MC-1102-50FQ
50ft (15m), 26AWG
•
Supports 3D video
•
Supports 4K
resolution
•
Supports Ethernet
•
Lifetime warranty
Enhanced Extender for HDMI over
Single Cat5e/6
MVE-AT11-01NQ
Extend HDMI signals up to 229ft (70m)
