ENFORCER HDMI Extender over Single Cat5e/6
SECO-LARM U.S.A., Inc.
Input video signal
0.5~1 Vp-p
Video formats supported
1080p/1080i/720p/576p/576i/480p/480i
Range
1080p
Cat5e: 98’ (30m) / Cat6: 164’ (50m)
1080i,720p
Cat5e: 164’ (50m) / Cat6: 197’ (60m)
576p, 480p
Cat5e: 197’ (60m) / Cat6: 213’ (65m)
576i, 480i
Cat5e: 213’ (65m) / Cat6: 230’ (70m)
Current
draw
Transmitter
780mA@5VDC
Receiver
109mA@5VDC
Video amplifier bandwidth
1.65Gbps/165MHz
Vertical frequency range
50/60 Hz
Operating temperature
32°~158° F (0°~70° C)
Operating humidity
10~85 % RH (no condensation)
Size
3
15
/
16
‖x2
1
/
2
‖x1" (100x65x25.5 mm)
Weight
13.6-oz (385g)
Power supply
2A@5VDC (2 adapters included) (2.1mm plug)
Features:
The MVE-AH020Q extends the range of traditional HDMI cabling methods by using an active
transmitter and receiver to send video and audio over a single Cat5e/6. HDMI formats as large as
1080p can be transmitted up to 164’ (50m) between the two units with zero signal loss by using
integrated circuits in the receiver and transmitter.
Flexibility
– Traditional HDMI cables present a number of challenges in long cable runs. HDMI
cables are rigid in structure and fixed in length making them very difficult to use in some
applications. By using Cat5e/6 to transmit HDMI signals, the length and route the wiring takes can
now be determined on an application by application basis.
Signal Strength
– Traditional HDMI cables have limitations on the signal strength they can provide
over long distances. Using an active transmitter and receiver, the MVE-AH020Q overcomes these
limitations by providing a clearer signal farther than HDMI cable alone.
Distance
– The MVE-AH020Q is capable of providing a clear HDMI signal over much greater
distances than HDMI cable alone. Using Cat6 cabling, a 1080p HDMI signal can be transmitted
up to 164’ (50m).
Formats Supported
– The MVE-AH020Q supports both progressive scan and interlaced formats.
Plug and Play
– The MVE-AH020Q comes as a complete set consisting of a transmitter and
receiver. No adjustments or settings need to be made, the unit is ready to use right out of the box.
Zero Signal Loss
– Integrated circuits in the transmitter and receiver clean, buffer, and amplify the
HDMI signal to prevent signal loss and ensure a clear signal regardless.
DVI Support
– The MVE-AH020Q can be used with an HDMI to DVI adapter to support multiple
components of a home theater system.
Specifications:
Parts list:
Introduction:
1 x Transmitter (Sender)
1 x Receiver
8 x Mounting screws
1 x Manual
2 x 5VDC power adapters
4 x Mounting brackets
