ENFORCER Wall-Plate Cameras
SECO-LARM U.S.A., Inc.
3
Overview:
Before Starting:
Mounting the Camera to the Plate:
Mounting Options:
Changing the Mounting Angle:
1.
Read this manual carefully and keep it for future
reference.
2.
Use the camera within given temperature and
electrical limits.
3.
Do not point the camera at the sun. Heat could
damage the camera, even when not in use.
4.
Do not mount the camera in areas exposed to
radiation, strong magnetic fields, or strong
electrical signals.
5.
Do not open or disassemble the camera. There
are no user-serviceable parts inside.
6.
Do not subject the camera to extreme shock.
Plate
Female BNC connector
DC Jack
Note polarity when connecting
To mount the camera to the plate, position the
angled rings behind the plate and twist the aluminum
hex nut on to secure the plate to the camera.
Install one of the angled rings on the front of the plate
so that the camera is tilted (approximately 20°).
If an object installed next to the camera on the wall
is blocking the field of vision, the angled rings may
be installed in front of the wall plate to move the
field of vision forward.
Mount directly to the back box (not included).
Drill a hole in the wall according to the diameter of
the camera body. Mount the plate directly to the wall.
Drill a hole in the wall according to the diameter of
the camera body. If mounting to a thick surface, it
may not be necessary to use the angled rings.
With Plate and Back Box
(suggested)
:
Plate, no Back Box:
No Plate and no Back Box:
Back
box
Min. wall thickness:
5
/
16
" (8mm)
Max. wall thickness:
EV-5105-N1SQ:
3
/
4
" (20mm)
EV-T5105-N2SQ:
1
5
/
16
" (34mm)
IMPORTANT:
Do not cut the video or power wires
as warranty will be voided.
Camera
Angled aluminum ring
Angled rubber/aluminum ring
NOTE:
Ensure that the angled aluminum ring is installed next to the aluminum hex nut in all
applicable mounting installations.
When installing the camera, ensure that the white mark behind the lens is at the top.
Aluminum hex nut
