ENFORCER 3X Series Vandal Rollerball Camera
14
SECO-LARM U.S.A., Inc.
DETECT SENSE: Set detection sensitivity.
Adjustable range: 0~127
BLOCK DISP: Mosaic blocks will appear
where movement is present.
(ON or OFF)
DETECT AREA: Set detection area. If
BLOCK DISP is turned ON, press ENTER
to set which part of the screen to display
mosaic blocks that will show motion was
detected. To exit DETECT AREA, hold
down the joystick for 3 seconds.
MONITOR AREA: Set the size and
detection area of a pink rectangle that will
flash whenever motion is detected.
-
AREA SEL: Up to 4 detection zones.
-
MODE: Enable the selected detection
zone. (OFF or ON)
-
TOP: Set the vertical start position.
Adjustable range: 0~15
-
BOTTOM: Set the vertical end position.
Adjustable range: 0~15
-
LEFT: Set the horizontal start position.
Adjustable range: 0~23
-
RIGHT: Set the horizontal end position.
Adjustable range: 0~23
Motion Detection:
This function is used to detect moving objects on-screen.
1.
Select MOTION DET on the Main Setup Menu screen.
2.
Select the desired motion detection mode by moving the joystick to the right or left.
3.
Select RETURN to return to the Main Setup Menu screen.
Motion Detection ON
Motion Detection OFF
