![ENFORCER ENFORCER MVA-VH01Q Manual Download Page 4](http://html1.mh-extra.com/html/enforcer/enforcer-mva-vh01q/enforcer-mva-vh01q_manual_2412256004.webp)
SECO-LARM VGA-to-HDMI® Converter
SECO-LARM U.S.A., Inc.
Troubleshooting
HDMI device does not function correctly
Make sure the converter is powered.
Make sure the input and output devices are powered.
Test the VGA and RCA cables separately to make sure
they are functioning.
Test the HDMI cable separately to make sure it is
functioning.
Make sure that you are trying to convert VGA to
HDMI. The MVA-VH01Q does not convert HDMI
to VGA.
Make sure the HDMI source is compatible with the
HDMI display.
Products Available from SECO-LARM
:
mi-MVA-VH010Q_1005.docx
PICCN3
Audio Baluns
HDMI Switcher
VGA over Cat5e/6
1-in 5-out
HDMI® over Cat5e/6
Component Video
over Cat5e/6
HDMI® Cables
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
WARRANTY
This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period
of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair or replacement of
any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating
properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any
kind to the purchaser or anyone else.
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is
one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice.
SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2013 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the
written permission of SECO-LARM.
SECO-LARM
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
E-mail: [email protected]