VOICE DIALER Installation Manual
Page 7
RECORDING OUTGOING VOICE MESSAGE(S)
The E-920A can play back one or two
outgoing messages of up to 16 seconds
each (see WIRE DIAGRAM, page 3):
• Message one is played when trigger
input #1 (yellow wire) is triggered.
• Message two is played when trigger
input #2 (green wire) is triggered.
To ensure the message is received, each
message is repeated 2 times.
Both outgoing messages should be timed
and practiced prior to recording.
To record the outgoing voice message(s):
1. Locate the microphone in the lower
right corner of the speaker. When
recording a message, talk in a normal
voice about 10 inches from the
microphone.
2. Place the unit in the PROGRAM mode
by pressing the "MODE" button.
3. Press dial key "1" to specify the first
voice message, or press dial key "2"
to specify the second message.
4. To record, press and hold the
"VOICE" button down to initiate the
recording process. The word
"VOICE" will appear in the LCD
during recording. The "VOICE"
button must be held down for the
entire time of the recording.
5. As soon as the voice key is released
or when 16 seconds have passed,
the word "VOICE" will disappear
from the LCD. This indicates that the
message is stored.
6. If you wish to change either
outgoing message, repeat steps 1
through 5. The previous message
will be replaced when the new
message is recorded.
Power
12VDC ONLY
Current Draw
20mA (standby)
60mA (operate)
Trigger Inputs
2 N.C. inputs
Temperature Range
-20°C to +50°C
-4°F to +122°F
NOTICE
The information and specifications printed in this manual are current at the time of
publication. However, the SECO-LARM policy is one of continual development and
improvement. For this reason, SECO-LARM reserves the right to change specifications
without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2003 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be
reproduced or copied, in whole or in part, without the written permission of SECO-LARM.
SPECIFICATIONS
No. of Tel. # Stored
Up to 4
Max. Digits per Tel #
32
Case Material
ABS plastic
Weight (inc. battery)
10.6 oz. (300g)
Dimensions (in.)
5
7
/
8
x 4 x 1½
(148 x 100 x 38mm)
Warranty
1 Year
