Enerzone Destination 2.3 Insert Installation And Operation Manual Download Page 41 | Manualshive

Page: 41 / 58

Enerzone Destination 2.3 Insert Installation And Operation Manual Download Page 41

Destination 2.3 Insert Installation and Operation Manual

41

B) Your dealer may offer a liner fastening system (AC02006), sold separately. Follow the

installation instructions provided with the liner fastening system.

9.5.2 If the chimney liner does not align with the insert’s flue outlet

You can install a liner offset adapter (AC01370), which is sold separately. Please note that
an offset adaptor reduces the free flow of exhaust gases and may result in smoke roll-out
from the insert when it’s door is opened for loading. Only use an offset adaptor if a) there is
no other alternative and b) if the total height of the fireplace and chimney is at least 20 feet.
If  you  must  install  a  liner  offset  adapter,  secure  the  three  brackets  with  the  three  screws
provided (30131) on top of the insert in the three holes in front of the flue outlet. The long
end  of  the  brackets  must  be  attached  to  the  insert.  The  brackets  and  screws  are  in  the
insert’s  owner’s  manual  kit.  Then  follow  the  instructions  in  the  manual  provided  with  the
liner offset adapter kit.

«
...
39
40
41
42
43
...
»

Summary of Contents for Destination 2.3 Insert



























































Reviews:

No comments