Enertex® EibStudio
P.
142 of 349
Directly Storing on a FTP server
If the filter is activated (E
IB
PC – F
ILTER
CURRENT
EIB-M
ESSAGES
), the status display changes as indicated
in Figure 19. The filter acts both to telegrams in the message window, as well as when saving to a
CSV file like the Autolog function.
Figure 19: Filter display in the bottom right of the status display, right picture: Filter enabled
You have the option of using wildcards:
The question mark “?“ stands for an arbitrary digit, the asterisk “*“ for any number.
If the last entry for the target is written “1/1/2
?
3“, all group addresses 1/1/2
0
3, 1/1/2
1
3 ... 1/1/2
9
3 are
filtered out. You can use any number of wildcards. Write 1/*/203, and all frames having the major
group 1 and subgroup 203 (and any middle group) are going to be processed .
Enertex® EibPC can also store telegrams on a FTP server. In this case the telegrams will be stored
in binary form at the FTP server. You can set the configuration of the FTP service in the menu
O
PTION
S – FTP-T
RANSFER
.
Alternatively you also can specify the settings direct in the application program by creating the
section
[FTP]
like this:
[FTP]
// FTP server
192.179.169.67
//Username
roman
//password
praktikum
//Remote FTP-Directory
telegrams/MyLog
//Timeout
60
//Max. buffer
3000
Similarly, you can set the configuration via O
PTIONS
– FTP
SETTINGS
(Fig. 20).
The data is swapped cyclically. The interval is defined by either the time or the buffer fill level.
Dialog (Fig. 20) swapped either in a time interval of 60 seconds or when a buffer level of 3000
messages is reached
Figure 20: Configuration dialog FTP settings
HandbuchEibPC_USA-30.odt, 2017-05-11
Enertex
®
Bayern GmbH - Erlachstraße 13 - 91301 Forchheim - [email protected]
