enertexbayern EibPC Manual Download Page 136

Page: 136 / 348

Enertex® EibStudio

137 of 349

Save and open the

network settings

DNS server

Factory settings

E-Mail settings (Option NP)

A new network configuration for the Enertex

EibStudio should be saved in a file with the extension

“set“. For this, there is the dialog O

PTIONS

→ S

AVE

ETWORK

ETTINGS

available.

An existing network configuration is opened by the corresponding dialog in the F

ILE

menu. The

Enertex

EibStudio stores this file by default with the extension “set“, as shown in Figure 7.

Figure 7: Open network preferences

If the Enertex

EibPC has to establish an Internet connection, then the Enertex

EibPC connects

itself to a DNS server for the purpose of name resolution. You can change the default connection.
For this, the dialog Figure 8 is available.

Figure 8: Setting DNS Server

If you want to check whether the Enertex

EibPC has taken over the data and whether the DNS

server is reachable, just click E

PC → T

EST

DNS S

ERVER

AND

PAY

ATTENTION

THE

WINDOW

“M

ESSAGES

“.

The factory settings can be reset using the reset button (see p. 19 for usage). In this case, you may
also delete any stored scenes and the user program.

The network settings can also be restored by the function E

PC → R

ESET

ETWORK

ETTINGS

. For this

feature, the Enertex

EibPC must be restarted by interrupting of the power supply. Take note of the

appropriate dialog message.

If you run the additional Enertex

EibPC software package “Option NP”, you can also send e-mails

with the Enertex

EibPC. For this, the activation codes have to be imported (see page 235) and a

SMTP access has to be set up. Also, you should have set up the DNS server (see above) and the
Enertex

EibPC should have an online connection to the Internet and a valid SMTP Server.

As shown in Figure 9, the e-mail settings can be configured in the dialog O

PTIONS

→ E

MAIL

ETTINGS

HandbuchEibPC_USA-30.odt, 2017-05-11

Enertex

Bayern GmbH - Erlachstraße 13 - 91301 Forchheim - [email protected]

Summary of Contents for EibPC





























































































































































































































































































































































Search results

Summary of Contents for EibPC

Reviews:

Related manuals for EibPC

Brands by name

Popular brands

enertexbayern EibPC, Manual

Search results

Summary of Contents for EibPC

Reviews:

Related manuals for EibPC

Brands by name

Popular brands