4
CAP LAMP SYSTEM
Replacing battery (Stainless steel cover)
1. To remove battery cover, remove the wax
seal (if applicable) from the lock screw hole.
2. Remove locking clamp hex screw with Allen
key (P/N 259442).
3. Remove locking clamp.
4. Lift up locking clamp end of cover and slide
cover back and off battery.
5. Remove
fuse.
Replacing battery (Plastic cover)
1. Remove the two M4 button head socket
screws from the two clamp holding the cover.
2. Un-clip the clamps and lift cover to one side.
3. Remove
fuse.
S8 plastic cover.
1. Remove the two M5 socket head screws from
the plastic cable clamp.
Summary of Contents for OLDHAM GS
Page 11: ...11 ...
