EnerSys Alpha Micro 100, Installation And Operation Manual

Page: 44 / 88

43
017-220-J0 Rev C
Table K — List of Parameters
Parameters Default Settings
Battery charging current (Amps) 3
Temperature compensation of battery charging (mV/°C/Cell) Standard charging method: -5.0 Bulk
charging method: 0
Maximum charge voltage: Standard > Auto mode @25°C (V) 27.3
Maximum float voltage: Standard > Auto mode @25°C (V)
26.4
Maximum charge voltage: Standard > Constant mode @25°C (V) 27.3
Maximum float voltage: Standard > Constant mode @25°C (V)
27.1
Maximum charge voltage: Bulk mode (V) 26.7
Maximum float voltage: Bulk mode (V)
26.7
Default low battery warning Bulk mode (V) 22
Start hour of rush hour of time of day action period #1 0
Start minute of rush hour of time of day action period #1 0
End hour of rush hour of time of day action period #1 0
End minute of rush hour of time of day action period #1 0
Start hour of rush hour of time of day action period #2 0
Start minute of rush hour of time of day action period #2 0
End hour of rush hour of time of day action period #2 0
End minute of rush hour of time of day action period #2 0
Line qualify time (sec) 3
Time setting of periodical self-test (minute) (hh:mm) 00:00
Inverter off delay setting (sec)
0
Inverter cutoff
disabled
Enable auto battery test disabled
Number of weeks setting of periodical self-test 4
Day of the week setting of periodical self-test Monday
Time of the day setting of periodical self-test 0
Battery low warning threshold setting (%) 40
Low voltage disconnect 21
Low voltage reconnect 24
Self test depth-of-discharge setting (%) 20
Time Of Day Action Enabled Disabled
Load shed timer1 duration 2 hours
Load shed timer2 duration 2 hours
Load shed timer3 duration 2 hours
Programmable dry contact #1 setting On Battery
Programmable dry contact #2 setting Low Battery
Password setting 1111