EnerSys Alpha FXM HP 1100, Technical Manual

Page: 85 / 150

0170022-J0 Rev A Page 73
9.3.2 FXM HP - Default Values
When a FXM HP system is created, all user configurable parameters are set to their default values.
Table 16: FXM HP - Default Values (Sheet 1 of 4)
Parameters Default Settings
System Type Normal UPS
Battery Float Voltage 54.0V (48V) / 27V (24V)
AC Input Frequency Auto Detect
AC Input Qualification Time 3 seconds
AC Input Sense Normal
Automatic Voltage Regulation Enabled
AC Input High Limit (AVR Disabled) 132V (120V) / 253V (230V)
AC Input Low Limit (AVR Disabled) 108V (120V) / 207V (230V)
Battery Capacity Rating 100Ah
Battery Open Circuit Voltage 51.4V (48V) / 25.7V (24V)
Battery Peukert Exponent 1.00
Battery Runtime Low Alarm 60 minutes
Battery Health Low Alarm 70%
Battery Temperature High Alarm (°C) 75
Battery Temperature Low Alarm (°C) -20
Charging Current Limit Amps 15A (1100/2000), 10A (650)
Elevated Absorption Charging Enabled
Elevated Absorption Arming Threshold 48V (48V) / 24V (24V)
Elevated Absorption Voltage 55V (48V) / 27.5V (24V)
Elevated Absorption Termination Threshold 5A
Elevated Absorption Timeout 1.0Hr
Temperature Compensation Slope (mV/°C/Cell) -2.5