User Manual
2 Overview
7
2.2.1 Operation Panel
Figure2-4
Operation panel
Table2-1
The illustration of operation panel
No. Name
Illustration
○
1
LCD
Display the working status and setting of UPS.
○
2
"ON" button
When UPS is off, press and hold "ON" button for 1s to turn on UPS.
When UPS is on and works in the mains mode, press and hold "ON"
button for 3s to do the battery test. When UPS works in the battery
mode, press and hold "ON" button for 3s to silence the buzzer(cancel
the mains abnormal alarm).
In the set page, press and hold "ON" button for 1s to confirm the setting.
○
3
"OFF" button
When UPS is on, press and hold "OFF" button for 1s to turn off UPS.
○
4
"SELECT"
button
Press "SELECT" button to transfer the display information, such as
output voltage, output frequency, input voltage, input frequency, battery
voltage, inner temperature, load percentage, fault information, etc.
Press and hold "SELECT" button for 5s to enter the set page. Then press
"SELECT" button to transfer the setting information, such as PAR/SGL
mode(only available for parallel system), ECO/INV mode or the
inverting output voltage that is 208V/220V/230V/240V, and press "ON"
button to confirm the setting.
