D. Warnings
1. Please read the instructions carefully
2. Do not place the EnerPlex Surfr in a hot enclosed area (such as a parked car in
summer time), the heat may cause damage to the phone or case.
3. Do not expose or immerse in water, the moisture may cause permanent
damage to the case and void the warranty.
E. Electrical Characteristics
Battery Capacity: 2,700 mAhr (~90%+ maximum charge)
Battery Type: Li-ion Polymer
Primary Input: 5V DC 1000 mA (min)
• Full charge of Surfr in 3 hours
• Full charge of Surfr and Phone in 6 hours
• Primary charging via included micro USB cable
Secondary Input: CIGS Photovoltaic panel (integrated)
• 0.38 Watts at STC Conditions (STC is Standard Testing Conditions,
25
o
C, 1000 W/m2, AM1.5)
• Full charge of EnerPlex Surfr under STC in 24 to 34 hours
-
ing on light sources, sun intensity, and temperature.
Output to Phone: 5.0V DC 1000 mA (max) lightning connector
F. Physical Characteristics
Size: 154mm x 74mm x 14.8mm [6.1 x 2.9 x 0.58in]
Weight: 117 g (0.25 lb)
G. Warranty/Standards
“Made for iPhone,” mean that an electronic accessory has been designed to connect
Apple performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Please note that the
use of this accessory with iPhone may affect wireless performance.
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
Rev. 6-1-15
Warranty: For warranty information, go to www.goenerplex.com
Standards: Certified to CE, FCC and RoHS requirements