11
OK
Figure 4, Positioning Material Inside the Blades
OK
Figure 5, Positioning Material Inside the Blades
9.5 Cutter Controls
The control knob is used to open and close the blades/
jaws. It will remain centered in the neutral position when
it is not being turned. See Figure 6.
• Rotate the knob to the left and hold it to close the
blades/jaws. See Figure 7.
• To stop blade/jaw movement at any time, release the
knob and allow it to return to the neutral position.
• Rotate the knob to the right and hold it to open the
blades/jaws. See Figure 8.
Figure 6, Neutral Position
Figure 7, Blades/Jaws Closed
Figure 8, Blades/Jaws Open
Summary of Contents for ECSE300
Page 20: ...WWW ENERPAC COM...
