Enerpac EBC20B, Instruction Sheet

Page: 21 / 28

21
10.6.2 Blade Replacement - Fixed Blade
Replace the fixed blade as described in the following
steps. Refer to Figure 16, items 3, 4 and 5.
1. Be sure that the cutter piston is fully retracted. If not,
start the cutter and cycle the piston until it is fully
retracted.
NOTICE
If battery is fully discharged and the piston is
extended, loosen the piston release screw to retract the
piston, as described in Section 8.3.
2. Remove battery from cutter to prevent accidental
motor startup during the following steps.
3. Place the cutter horizontally on a stable work surface.
4. Remove the fixed blade screw.
5. Remove the safety guard.
6. Remove the worn fixed blade and replace it with the
new fixed blade.
7. Secure the safety guard and new fixed blade using
the new fixed blade screw included with the new fixed
blade. Apply Loctite 243 thread sealant (or equivalent)
to threads. Torque to 18 ft-lb [25 Nm].
8. Test cutter for proper operation before placing it back
into service.
10.6.3 Blade Replacement - Moving Blade
Replace the moving blade as described in the following
steps. Refer to Figure 16, items 1 and 2.
1. Be sure that the cutter piston is fully retracted. If not,
start the cutter and cycle the piston until it is fully
retracted. If battery is fully discharged, loosen the
piston release screw as described in Section 8.3.
2. Remove battery from cutter to prevent accidental
motor startup during the following steps.
3. Place the cutter horizontally on a stable work surface.
4. Remove the moving blade screw.
5. Remove the worn moving blade and replace it with
the new moving blade.
6. Secure the new moving blade using the new moving
blade screw included with the new moving blade.
Apply Loctite 243 thread sealant (or equivalent) to
threads. Torque to 91.2 in-lb [10.3 Nm].
7. Test cutter for proper operation before placing it back
into service.
Figure 16, Fixed and Moving Blade Replacement
2
5
1
4
3
Key:
1. Moving Blade
2. Moving Blade Screw
3. Fixed Blade Screw
4. Safety Guard
5. Fixed Blade