4
Installation
1.Turn off the key lock and take
out inner box.
2. Open the upper cover and
connect the SATA power pin
header with SATA HDD.
3.
Fix the HDD with screws
(#6-32UNC), then close upper
cover.
4.Secure the frame by using the
screws
（
M3-0.5
）
.
5.
Connect the power cable to power
supply and SATA cable to M/B.
6.Put the inner tray into outer
frame & lock it.
Note: When you push the inner tray in, please raise the handle
as horizontal state. While you can't push any longer,
please put the handle down, then the inner tray will be
connected to the outer frame at the same time.
The handle isn't in horizontal
state when you push in.
Summary of Contents for UC-S106
Page 1: ...0 UC S106 Mobile Rack User s Manual SATA to SATA ...
Page 3: ...2 Product illustration ...
Page 7: ...7 ...
