7
Why does it take so long to get the 3D FIX?
1. The problem may happen if your GPS watch has not been turned on for
several days or because it operates under poor GPS signal environment.
2. Stand and face the GPS antenna towards the sky (the antenna is located
under the GPS letters on your watch).
3. If the GPS connection is still slow, try a GPS COLD START: MENU
>SETUP>STATUS>GPS SET.
Why can’t the device receive the heart rate signal?
1. Make sure the heart rate belt is based on 2.4GHz ANT+ protocol and it is
worn correctly.
2. Wet the sensor area (glossed rubber parts of the strap) of the heart rate
belt and put it on again.
3. Check if you paired the belt and the watch correctly as previously directed
in this guide.
4. If still not working, change the Heart Rate transmitter battery in the back.
The watch is not responding?
If the watch is unresponsive and you are unable to turn it off, press the POWER
button for at least 10 seconds. This will force the watch to turn off. Turn the device
back on, go to SETUP> STATUS and perform a RESET.
Federal Communications Commission
(FCC Notices)
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC RF Exposure requirements:
This device and its antenna(s) must not be colocated or operate in
conjunction with any other antenna or transmitter.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
PRODUCT WARRANTY AND THE USER’S AUTHORITY TO OPERATE
THE EQUIPMENT.
CAUTION
