22
4. Visually
5. Please
(0.024
6. Check
plug in by hand to
7. After
washer. If installing a
c
spark plug
8. Reinstall
9. Reinstall
12. Battery assembly and maintenance
1.Remove the screws from left access cover, take off the cover
.024-.028 in.
Gap
4. Visually inspect the spark plug. Discard it if the insulator is cracked or chipped.
5. Please use plug gauge to check spark plug gap, it should be 0.6
(0.024-0.028inch)
6. Check that the spark plug sealing washer is in good condition, and thread the spark
plug in by hand to prevent cross-threading.
7. After the spark plug is seated, tighten with a spark plug wrench to compress the
washer. If installing a new spark plug, tighten 1/2 turn after the spark plug
compress the washer. If reinstalling a used spark plug, tighten 1/8 to 1/4 turn after the
spark plug seats to compress the washer.
8. Reinstall the spark plug cap on the spark plug securely.
9. Reinstall the spark plug maintenance cover.
Spark plug must be assembled firmly, or it will become hot and may damage
generator.
A loose spark plug can overheat and damage the en
and maintenance (electric and electric/recoil start model
emove the screws from left access cover, take off the cover.
insulator is cracked or chipped.
it should be 0.6-0.7mm
condition, and thread the spark
plug wrench to compress the
new spark plug, tighten 1/2 turn after the spark plug seats to
spark plug, tighten 1/8 to 1/4 turn after the
securely.
Spark plug must be assembled firmly, or it will become hot and may damage
A loose spark plug can overheat and damage the engine.
models only)
