Energy Star 197E3LSU 00 AP, Service Manual

Page: 58 / 83

ʳ
ʳ
ʳʳʳʳʳ
ʳ
ʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˃ˁ˅ 197E3L
18.5” Wide WXGA+ LCD Monitor
2011/05/05 PHILIPS 9 of 24
58 197E3L LCD
3.3 Timing requirement
Factory Preset mode definition:
1. Perfect FOS while presenting those timings.
2. Will specify those timing in User's Manual
Preset mode definition:
1. Need to support those timings.
2. Perfect FOS after auto adjustment.
User mode
1. Can save those timing that not in Preset mode and can be showed (not over scaler or
Panel spec.)
2. It needs to reserve the 10 timings space in memory size.
3.3.1 Mode storing capacity
Preset modes : 59
˄ˌˊ˘ˆ˟ʳ˧˼̀˼́˺ʳ
˧˴˵˿˸ʳ˹̂̅ʳˣ˻˼˿˼̃̆˲˅˃˄
Video timing mode (internal firmware support) ,
60Hz: 480p/720p/1080i/1080p
50Hz: 576p/720p/1080i/1080p
For these video timings , can only approve shown on screen, but not make sure has right picture
quality.
3.3.3 Software control functions via OSD / control adjustable functions:
Please refer to following M3 OSD definitions, if any deviation, then refer to PVT Exit sample.
ITEM
1 OSD DEFINITIONS
ˠˆʳˢ˦˗ʳ˕̈̇̇̂́ʳ
˷˸˹˼́˼̇˼̂́ʳ˲ʳ˅˃˄˄˃ˈ˃˅
Reset -
No: Exit
Yes: Auto adjustment for
displaying timing mode and
recall factory preset
2 OSD LANGUAGES
ˢ˦˗˲˦̇̅˼́˺˲ˠˆ˲˅˃˄
˄˃ˆ˅˅ˁ̋˿̆
9 LANGUAGES
3 OSD TREE
ˠˆʳˢ˦˗ʳ˕̈̇̇̂́ʳ
˷˸˹˼́˼̇˼̂́ʳ˲ʳ˅˃˄˄˃ˈ˃˅
4 POWER ON LOGO
˄ˋˁˈ˪˲˄ˆˉˉ̋ˊˉˋ˲́
˸̊ˁ˵̀̃
Power On Logo: Power On
Æ
Show up Philips logo 3
seconds
Æ
Change to input signal.
This picture is reference only.
The official drawing will send
out by PM.