Using the Auto-Adjustment Function
You can easily optimize the screen performance for the VGA input by using the Auto/Select button on the monitor and
the auto-adjustment pattern software on the CD provided.
Do not use this procedure if your monitor is using a DVI or HDMI input. If your monitor is using the VGA input, this
procedure can correct the following image-quality conditions:
■
Fuzzy or unclear focus
■
Ghosting, streaking, or shadowing effects
■
Faint vertical bars
■
Thin, horizontal scrolling lines
■
Off-center picture
To use the auto-adjustment feature:
1.
Allow the monitor to warm up for 20 minutes before adjusting.
2.
Press the Auto/Select button on the monitor front panel.
❏
You can also press the Menu button, and then select
Image Control
, followed by
Auto Adjustment
from
the OSD menu. See “Adjusting Screen Quality” in this chapter.
❏
If the result is not satisfactory, continue with the procedure.
3.
Insert the CD in your computer CD drive. The CD menu displays.
4.
Select the language.
5.
Select
Open Auto-Adjustment Software
.
6.
The setup test pattern displays.
Auto-adjustment setup test pattern
7.
Press the Auto/Select button on the monitor front panel to produce a stable, centered image.
CAUTION:
Burn-in image damage may occur on monitors that display the same static image on screen for a
prolonged period of time (12 consecutive hours of non-use). To avoid burn-in image damage on your monitor screen,
you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged
period of time. Image retention is a condition that may occur on all LCD screens.
Downloaded from ManualMonitor.com Manuals
Summary of Contents for 1859m
Page 1: ...User s Guide 1859m 2009m v f 2159m v 2309m v 2709m Downloaded from ManualMonitor com Manuals...
Page 4: ...Downloaded from ManualMonitor com Manuals...
Page 30: ...Downloaded from ManualMonitor com Manuals...
Page 34: ...Downloaded from ManualMonitor com Manuals...
