6/7
energysistem.com
Charging the battery
When the battery level is below 10%, the LED INDICATOR (4) will flash white. You will also hear a sound to remind you
to charge the battery through the CHARGING PORT (5).
Plug the USB Type-C end of the included USB cable into the CHARGING PORT (5) and connect the other USB end to any
device with a USB charging port that provides energy (PC, USB wall charger, car charger, etc) to charge the battery.
The LED INDICATOR (4) glows white while charging the device and turns off once the charging process has been
completed.
Important: We recommend not leaving your Earphones Bluetooth Sport 1+ unused for long periods of time with an
empty battery. We advise charging the battery at least once a month.
Bluetooth pairing
Switch on your Earphones Bluetooth Sport 1+ and wait for approximately 4 seconds until the LED INDICATOR (4) starts
flashing white. At this point, your earphones start searching for devices and can be paired with your music player. Once
"Energy Sistem EP Sport 1+" appears on your devide screen, press "connect". Both devices will be connected
immediately and without codes. You will hear a sound that confirms both devices have been paired correctly.
To pair your earphones with the same music player once again, you don?t need to repeat the steps above. Just leave
Bluetooth enabled on your music player and switch on your Earphones Bluetooth Sport 1+. They will sync automatically.
Press and hold the MULTIFUNCTION BUTTON (1) for 8 seconds to disconnect the devices and pair your earphones with a
new device.
Playback control
Press the (3) or VOLUME - (2) buttons to adjust the playback volume. You will hear a beep when reaching the
maximum volume.
Press the MULTIFUNCTION BUTTON (1) to pause or resume playback.
Press NEXT (3) or BACK (2) for 2 seconds to skip to the next or previous track.
Call control
Once the Earphones Bluetooth Sport 1+ and your smartphone are synchronised, you can control calls from the
earphones.
Answering a call
Press the MULTIFUNCTION BUTTON (1) once to answer a call.
Ending a call
Press the MULTIFUNCTION BUTTON (1) once to end a call.
Rejecting a call
Press the MULTIFUNCTION BUTTON (1) for approximately 2 seconds to reject an incoming call.
Using the Voice Assistant feature
You can interact with your smartphone voice assistant using your Earphones Bluetooth Sport 1+. To do so, press the
MULTIFUNCTION BUTTON (1) twice. You can give the voice command after hearing the confirmation sound.
Summary of Contents for sport1+
Page 2: ...2 7 energysistem com ...
