ENERGY SISTEM Office 2+, User Manual

Page: 6 / 7

6/7 energysistem.com
Connecting the headset to a computer
There are two possibilities to connect the Headset Office 2+ to your computer:
Using the USB port
Use the adapter provided with the product. Connect the USB plug for computer (11) to the USB port. The drivers will be
installed automatically. The computer will detect the connected device after a few seconds. Then restart your computer
so that the necessary drivers are installed correctly.
From that moment on, you can adjust the volume using the adapter.
To turn up or down the volume, press Volume - (2) or (3) until reaching the desired level.
Press the Sound on/off (4) button to mute the headset.
Press Mute/Unmute microphone (5) to mute the microphone. The Muted mic LED (1) glows red when the microphone is
muted.
Important: If you detect a malfunction, please disconnect the USB adapter from your computer, reconnect it and
restart the computer again in order to re-install the drivers.
Important: Make sure the 3.5mm miniJack connector is completely inserted into the USB adapter connector.
Using the 3.5 mm mini jack plug
If your computer features a single audio connection, connect the headset directly using the 3.5 mm mini jack plug (10).
This connection must work both as an audio input and output.
It is usually marked with a headset symbol.
Important: Make sure you have selected the headset when adjusting the computer sound settings. In both cases, you
must select the headset microphone as the computer audio input and the headset/headphones as the computer audio
output.