After the batteries are fully charged, the LED will light
up indicating the trickle charge is on. The charged
batteries are ready for use.
7.
Unplug the charger and remove the batteries from the
charger when not in use.
8.
Begin again at S
tep 1
to charge the next set of
batteries.
Bad Cell Detection :
When charge process is started, the charger detects the
health status of the cells in the battery compartment. If any
battery is unsuitable for charging. i.e. short circuit or reversed
polarity, the status LED will switch off.
Specifications :
Charge rate :
(when using indoor or in a
vehicle) – 12VDC input
2PCS AA 1000mA
4PCS AA 600mA
2 or 4PCS AAA 350mA
(when using with a operating
computer/laptop ) – 5VDC
input
2 PCS AA 700mA
4 PCS AA 400mA
2 or 4PC AAA 350mA
Trickle mode :
AAA 15mA
AA 25mA
Operating
temperature
0
-
35
