5/8
energysistem.com
FLEXIBLE EAR HOOKS
1.
MICROUSB CHARGING PORT
2.
MULTIFUNCTION BUTTON
3.
MICROPHONE
4.
LED INDICATOR
5.
Main functions
Switching on and off the device
To turn on your device, press and hold the multifunction button (3) for 3 seconds. The LED indicator (5) will glow blue
and the main earphone (left) will start searching the right earphone to establish the connection . You will hear a
confirmation sound informing that both earphones of your Earphones 6 True Wireless are successfully paired and in
search mode. At this point, your earphones can be paired with a Bluetooth device.
When the device is on, the LED indicator (5) will keep flashing blue.
To turn off your device, press and hold the multifunction button (3) for 5 seconds. The LED indicator (5) will glow red for
2 seconds and you will hear a confirmation sound.
Charging the battery
When the battery level is below 10%, the LED indicator (5) will flash red and you will hear a sound to remind you to
charge the battery through the charging port (2).
Detach the ear hooks (1) and then connect the charging cable to the earphones’microUSB port (2) to charge the
battery. Connect the other cable end to the USB port of any device to provide energy (PC, USB wall charger, car
charger, etc.).
The LED indicator (5) will glow red while charging the battery and will change to blue once the charging process is
completed. The charging process takes about 1 hour and a half.
Important: We recommend not to leave your Earphones 6 True Wireless unused for long periods of time with an empty
battery. We advise to charge your earphones' battery at least once a month.