ENERGY SISTEM eco beech wood, User Manual, Page: 6 / 10

6/10 energysistem.com
will also hear a confirmation sound.
Press and hold On/Off (1) for 2 seconds to switch off the device. You will hear a confirmation sound when the device
turns off.
Playback modes
To select the preferred playback mode, press Playback mode (2) until you find the mode you want. The modes available
are: Bluetooth, USB, audio-in (AUX) and FM radio mode.
Press Play/Pause/Calls/TWS (4) to control playback functions such as start, pause or resume playback.
Press Back/Volume - (3) and Next/ (5) to adjust the volume according to your preferences. You will hear a
warning sound when reaching the maximum volume.
To switch between tracks, press and hold Back/Volume - (3) and Next/ (5) for two seconds until you find the
song you are searching for.
Bluetooth (BT)
Press Playback mode (2) until you find Bluetooth mode. Once selected, you will hear a sound. The LED indicator (6)
flashes blue. This means your speaker is ready to be paired wih another device. Enable Bluetooth on your smartphone
or tablet and select
Speaker Eco from the list of available devices. The devices will be connected automatically, without
codes. Once the devices are paired, you will hear a confirmation sound. The LED indicator (6) glows blue.
At this point you can start music playback on your smartphone or tablet. The Bluetooth connection range is up to 20
metres.
To control playback from the speaker, use Play/Pause/Calls/TWS (4) , Back/Volume - (3) and Next/ (5) .
You may also use the voice assistant. To do so, press On/Off (1) . Ask questions or give voice commands using the built-
in Microphone (7) .
You will be able to answer incoming calls as well. When receiving a call, the song you are listening to stops and the
ringing tone sounds instead. Press
Play/Pause/Calls/TWS (4) to answer the call. Press it once again to hang up. The song
will resume automatically.
Keep a distance of 30-50 cm from the speaker for a proper voice reception. The Microphone (7) is located at the front of
the speaker, next to the LED indicator (6) .
Your Speaker Eco will be automatically paired when you turn it on once again, provided that Bluetooth is enabled on
your smartphone or tablet.
Press and hold Play/Pause/Calls/TWS (4) for 2 seconds to disconnect the current device and pair the speaker with a new
one.
True Wireless Stereo (TWS)
This technology makes it possible to wirelessly pair a second Eco Speaker and listen to music with twice as much power.
This way, you will create a stereo sound system with separate left and right channels.
Switch on both speakers and enable Bluetooth on both of them. Pair your smartphone or tablet with one of the
speakers. Press and hold
Play/Pause/Calls/TWS (4) on the other speaker until both units are connected. You will hear a
confirmation sound. Start enjoying your music with TWS technology.
To end the TWS connection, press and hold Play/Pause/Calls/TWS (4) until both units disconnect from each other.