ENERGY SISTEM BT9 Bluetooth, User Manual

Page: 6 / 8

6/8 energysistem.com
Bluetooth pairing
With your Bluetooth Headphones BT9 turned off press the Bluetooth button (1) and you will see the LED (4) flash in red
and blue. This will indicate that your Bluetooth Headphones BT9 are trying to sync with another Bluetooth device; start
at the same time on your Bluetooth device, smartphone, tablet, laptop, etc. the sync function and once the BT9
Headphones Bluetooth are available, select “connect” on your device; they will connect immediately and without
needing any codes. The LED will flash in blue to indicate that the device is switched on and in Bluetooth mode.
If your device has a NFC function, you can pair your devices by simply touching the NFC (2) icon, which located on the
right earpiece. In this case it is not necessary that the headphones are turned on, but you must activate the NFC
connection on your device.
If your Headphones BT9 Bluetooth are already synced with a device, they will pair automatically. To pair a new device,
turn your BT9 Headphones Bluetooth on and hold the Bluetooth button (1). This way the headphones will start a new
search.
NOTE: If you have the device turned on but the Headphones BT9 are not synced with any other device, bluetooth
pairing mode will enter standby mode. To activate this mode again hold for 4 seconds the bluetooth button (1). You will
hear a sound indicating that you have entered pairing mode and the LED (4) will flash faster.
Control talk
With the Headphones BT9 Bluetooth paired to your smartphone or tablet, you will be able to receive phone calls with its
built-in microphone (14). To answer phone calls simply press the multifunction button (1) once. In case you are listening
to a song when receiving a phone call, the music will stop automatically and you will hear a ring tone.
Press the multifunction button (1) again to end the phone call; the song you were listening to will resume from where it
stopped when you received the phone call.
If you wish to reject the phone call from the headphones just press and hold the bluetooth button (1) for two seconds.
Recall
With your Headphones BT9 Bluetooth you will be able to repeat the last phone call registered on your smartphone. To
do so, press the multifunction button (1) twice and it will automatically make the phone call.
Micro SD
To play MP3 files, insert a Micro SD card into the slot (11).
If you turn off the Headphones BT9 Bluetooth or remove the Micro SD card, the song you were listening to will be stored
in the device’s internal memory. When inserting the Micro SD card again, the headphones will resume the song you
were listening to at the moment it stopped.
If you want to select the Bluetooth function directly from the Micro SD Playback Mode, simply press the Bluetooth
button (1). However, it is not possible to do the switch from the bluetooth mode to the Micro SD Playback Mode, being
necessary to turn off the bluetooth mode before.
Playback control
Once your BT9 Headphones Bluetooth are synced or if you have inserted a micro SD card, you will be able to control
basic playback functions directly from the headset such as: volume up and down, forward and backward, play and
pause in addition, you will be able to change within the 5 different equalization modes.
If you want to listen to another track press the forward button (5) once. You can also back song by pressing the
backward button (7).
You can raise and lower the volume using the buttons (3) and (6). You will hear a "beep" sound when the max. volume
is reached.
To pause or resume your music press the Bluetooth button (1) once.In case you are in Micro SD Playback Mode, press
the micro SD button (9) to perfom these actions.