PAGE 4 OF 8
Laser Startup Guide
1.
Use a fully charged battery (6.) and twist it clockwise onto the laser probe. Keep twisting until
the laser switches on. 3 short beeps will sound followed by 1 long beep before the laser starts
up.
MODE:
LASER ON. When the laser is on the LED light is continuously green (4.)
2.
The LED light (4.) will be continuously green
Short beep every 10 sec.
The lasers effect = 100%
The laser is active for 300 sec. (5 min) after which the laser stops automatically while giving off
a long beep followed by a high / low beep. This indicates that the laser has automatically gone
into
MODE:
STANDBY. The indicator LED light will change from a continuous green (4.) to
flashing a yellow light.
3.
To turn the laser off simply unscrew the battery (6.) with a counter-clockwise motion
MODE:
LASER OFF.
If you wish to restart the laser reattach the battery to the laser
MODE:
LASER ON.
IMPORTANT NOTICE!
- Do not fasten the battery (6.) too tightly!
- Only hold onto the bottom laser section (5.), when the battery (6.)
is being screwed on or off!
- Never hold the laser by the cooling piece (2.) when the laser is ON!
- Always remove the battery (6.) from the laser probe (3.) after use!
Device Description PERSONAL-LASER™
1. Laser Optics
2. Laser cooling piece
3. Laser probe
4. LED DISPLAY (green / yellow / red)
5. Bottom laser section
6. Li-Ion battery
LED DISPLAY:
ERROR = RED
STANDBY = YELLOW
LASER ON = GREEN
1
.
3.
4.
6.
5.
2.