VB204W User Manual
56
The following table describes the parameters of this page.
Field
Description
Connection
Choose an IPv6 WAN connection.
Enable
Tick in the box to enable a firewall rule.
Protocol
Choose a protocol corresponding to the rule. You
may choose
TCP
,
UDP
,
ICMPv6
or
TCP/UDP
.
Source/ Destination
IP
Original/ destination IP address
Source prefix length
Original/ destination mask
Source/Destination
Port
Original/ end port, which is the original port range
Description
You can describe this IPv6 filter rule.
After setting the parameters, click
Submit
. The page shown in the following figure
appears. You can also click
Edit
or
Delete
to manage the rule.
