IMPORTANT SAFETY PRECAUTIONS
•
Note: There is a replaceable 10A glass fuse in the cigarette lighter adapter. Replace a blown fuse
by gently unscrewing the tip of the lighter plug and inserting in a new one of comparable Amp
rating.
•
Do Not
replace fuse with a higher amp rated fuse.
•
Do Not
immerse the cooler/warmer or the 12V adapter in water.
•
Do Not
insert foreign objects into the cooler/warmer vent openings. The ventilation openings should not
be covered at any time while the cooler/warmer is operating.
•
Do Not
use the cooler/warmer in the open air when it is raining or snowing; it is not designed to be
waterproof.
•
Do Not
place cooler/warmer near heat sources: heating vents, radiators, sunlight and/or any other
sources of heat.
•
Do Not
use the cooler/heater in the presence of flammable fumes or gases, such as propane.
•
Do Not
hold the plug with wet or moist hands. Shock, serious injury, or death could result as liquids can
conduct electricity.
•
Do Not
use for cooking.
•
Do Not
use for medical reasons or storage of medicine.
•
Do Not
operate the cooler/warmer if it has received a sharp blow, been dropped or otherwise damaged
in any way.
•
Do Not
place liquids or foods in direct contact with this unit.
•
Keep out of Reach of Children.
The interior becomes very hot or cold and could cause injury.
USE AND CARE
• Do not modify the cooler/warmer in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment. There are specific applications for which the
cooler/warmer was designed.
• Always check for damaged or worn out parts before using the cooler/warmer. Broken parts will affect the
operation. Replace or repair damaged or worn parts immediately.
• When the cooler/warmer is not in use, store it in a secure place out of the reach of children. Inspect it for
good working condition prior to storage and before re-use.
OPERATION
• Ensure the Orange On/Off button is OFF.
• Start the vehicles engine.
• Plug the power cord into the cooler/warmer.
• Plug the power cord into the 12V cigarette lighter outlet firmly.
• Turn the cooler/warmer on by pressing and holding the Orange button for two seconds.
• Select the cooling (Blue button) or heating (Red button) function.
• The Blue LED will be illuminated when cooling and the Red LED will be illuminated when heating.
• Place foods/beverages inside the cooler/warmer and close the cover.
• Turn the cooler/warmer off by pressing and holding the Orange button for two seconds.
• The unit will always perform best if filled with foods/beverages that are already cold or warm.
• Operate unit only with cord provided. Store the cord inside the unit to prevent losing it.
COOLER FUNCTION
• The unit will take about 30 minutes to cool to 35.6° - 41° F (assuming an Ambient Temperature of 77° F).
The higher the Ambient Temperature (Room Temperature) the higher the cooler temperature will be.
• Pre-chilled items will assist the fridge to cool down faster.
• The cooler will continue to operate as long as the unit is plugged in.
• After being unplugged the unit will remain cool for a period of time.
• The contents of the unit will come up to room temperature over time and caution should be exercised to
ensure food does not spoil.