User Manual and User Information Model VN-1810.
2. User Operation
The VN-1810 does not contain a power switch. Place the stand on a flat surface. Insert mounting cleats
into corresponding holes in the back of the device. The device is intended to operate only when correctly
installed into the stand, do not use without the stand. Ensure external fans are at the bottom of the device
once mounted. Connect the Jack port cable end to the VN-1810 Charger and the AC power cable end to
the wall outlet. When not charging, the VN-1810 is in standby mode.
Place the equipment to be charged in front of the VN-1810 charger. The equipment will commence
charging within a few seconds. Consult the equipment’s user manual for the time duration and procedures
for charging.
3. Radio Characteristics:
The VN-1810 transmitter nominal frequency is: 917.5MHz
The VN-1810 transmitter conducted average output power is: 40dBm
The BLE transmitter (VN-1810) operating frequency: 2402 – 2480MHz
The BLE transmitter (VN-1810) max peak output power: -1.66dBm
4. Jack Port
Insert the designated cable at the Jack port cable end to the VN-1810 Charger and the AC power cable
end to the wall outlet.
5. Packaging contents
VN-1810 WattUp WPT Charger with stand
User Manual and User Information
