Energizer EZV2000, User Manual

Page: 29 / 88

29
6.0 Troubleshooting
Common issues can be fixed by following the instructions in this guide. If the unit
will not function after following these instructions, contact technical support before
attempting to use or repair the product.
PROBLEM SYMPTOMS CORRECTION
Generator will
not start
Generator will
not start
3. The power switch is in the “Off” position. Switch
to “On.”
4. The engine is out of gasoline, add more.
5. Engine choke is in wrong position. Adjust choke
lever according to instructions on page 20.
6. Faulty spark plug, replace with equal or
greater quality plug. Refer to page 31 in your
user’s manual for a complete list of spark plug
compatibility codes.
7. Insufficient oil, add more oil.
8. Clogged fuel line, inspect gas tank for debris.
High resistance
when pulling
recoil starter.
1. The engine does not have enough oil - add oil.
2. Air filter element obstructed by debris. Clean
according to user manual instructions on page 25
.
Difficulty
starting
Engine requires
many attempts
to start
1. Disconnect load before starting.
2. Incorrect oil being used. Please refer to the oil
usage chart on page 26 in your user’s manual.
3. Faulty spark plug, replace with equal or
greater quality plug. Refer to page 31 in your
user’s manual for a complete list of spark plug
compatibility codes.
Thick smoke
released from
exhaust
Exhaust fumes
thick and dark
1.
Adjust choke lever according to user manual
instructions on page 20.
2.
Incorrect oil being used. Use oil according to oil
usage chart in user manual on page 26.
3.
Air filter element obstructed by debris. Clean
according to user manual instructions on page 25
.