Energizer EZ40VTDE46TN, User Manual

Page: 13 / 26

5. ASSEMBLY
5.1 UNPACKING
Before beginning assembly o
f the
product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.

Carefully remove the product and any accessories from the box. Make sure that all items listed in
the packing list are included.

Inspect the product carefully to make sure no breakage or damage occurred during shipping.

Do not discard the packing material until you have carefully inspected and satisfactorily operated
the product.

If any parts are damaged or missing, please call
the
dealer for assistance.
5.2 UNFOLDING AND ADJUSTING LOWER HANDLE
WARNING:

Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition.

Do not damage the cables when folding or unfolding the handle.

If a cable is damaged, contact an Authorized Service Dealer.
To raise handle assembly (Fig. A):
1) Pull up and back on the lower handle (1) until it is aligned with the hole position of the arm support and the
mower housing.
2) To secure the lower handle (1) in place, lock the lower screw (3).
3) Open the upper cam locks (2).
4) Pull up and back on the upper handle to raise it into operating position.
5) To secure the upper handle in place, close the upper cam locks (2).
(Fig. A)
NOTE: If the upper handle is loose or separated from the lower handle, tighten the knobs on the upper handle
locks by turning them clockwise.
INSTALLING THE GRASS CATCHER BAG (Fig.B):
1)
Lift the rear discharge door (1).
2)
Lift the grass catcher by its handle (2) and place under the rear discharge door so that the hooks (3) on
the grass catcher are seated on the door rod (4).
3) R
elease the rear discharge door. When installed correctly, the hooks on the grass catcher will extend
through the openings on the rear discharge door.
1 3