8.5 Tlimit
Function
8.5.1
Send “
p 50
” (50M is the distance, 1-6000M set), reply “tlimit ok” (note: this
function is with auto-tracking function only. If the later position is 50M away with the position before,
it will send sms or gprs data. If less than 50M, it will not send in order to save SMS or gprs fee.
8.5.2
Send”
p 0
” to cancel this function, the locator will “tlimit ok”.
8.6
GPS-refresh setting
Send SMS “
GPSAutpspace+120
”
，
it will reply “GPSAutoSearch ok”. The
locator will search GPS signal in 120s interval after setting this.
The refreshing time is between 120-600 seconds (120<interval <600)
Longer standby time for longer refreshing time and shorter standby time for shorter refreshing time.
8.7
Reboot remotely
passwored
can be sent to the locator to make the CPU restart when GPRS is stopped. The
locator will turn off and restart in 3 minutes after sending this command.
8.8 Geo-fence (Set Safe Zone)
Set up a geo-fence (safe zone) around of the locator and it will send message to the authorized
numbers when the locator goes out of the area.
Notes:
This function will be invalid if the unit moves outside the safe zone. You need to re-set it if you
want this function again.
8.8.1
Send SMS
spspace+longitude,latitude;longitude,latitude
to the unit to
set the restricted district.
Remark: The first longitude & latitude is coordinate of the top left corner of the Geo-fence, while the
second longitude & latitude is the coordinate of the bottom right corner. It will reply stockade ok.
TO: Locator
stockade123456
19.124845e,73.56718
5n;19.777888e,74.555
666n
From: Locator
stockade ok
10
