710W PERCUSSION DRILL ENB463DRL
5. SWITCH LOCK
The On/Off switch trigger can be locked in OFF position.
This helps to reduce the possibility of accidental starting
when not in use. To lock the switch, place the
forward/reverse rotation control in the center position.
6. REVERSIBLE
Use the reverse-rotation lever to switch between clockwise
and anticlockwise rotation.
For drilling use forward rotation, slide the rotation lever to
the right. To use reverse rotation, slide the rotation lever to
the left to release a jammed drill bit.
(Fig.5)
Warning!
Never change the direction of rotation when the chuck
is rotating, Wait until it has stopped.
7. SPEED ADJUSTMENT
The pressure that is applied to the switch will determine the
speed. The more pressure that is applied, the faster the
speed. Your operating speed can be set by using the speed
dial.
For increased speeds, move the dial in a anti-clockwise
direction.
For decreased speeds, move the dial in an clockwise
direction.(Fig.6)
If using the speed dial, the drill will automatically run at the
predetermined speed when the trigger switch is fully
depressed.
8. FUNCTION SELECTION BETWEEN DRILLING AND
PERCUSSION
The function drilling is obtained simply by placing the button
on the top of the machine on the symbol
The function percussion/
masonry drilling
is obtained by
placing the button on the top of the machine on the
symbol
(Fig.7)
Fig.5
Fig.6
Fig.7