Energeeks EG-AL001, User Manual

Page: 22 / 24

User Manual
Mounting
The adhesive tape is pre-cut to fit the shape of the alarm unit and the magnet.
Peel off the protective paper from one side and apply them to the back side of
each the alarm unit and the magnet.
Carefully clean the location where the alarm is intended to be placed. Remove
the other side of the protective paper of the alarm unit and stick it to the door/
window frame. Peel the paper off of the magnet (Note: both the alarm unit and
the magnet have a
triangle symbol on it - this indicates their closest position - see above image)
and stick it to the other frame on the corresponding location. Important: The
space between the alarm unit and the magnet should be between 1 and 9mm.
Once installed, run a test by pressing the SET button to make sure the system
works properly. You should hear the alarm sound.
Example of Window & Door Alarm
installation
22