INSTALLATION GUIDE
Battery Reset
Archie is fitted with a Battery Reset switch. This allows a flat battery to be "jump started" from the
main/start vehicle battery, when connected.
1. Turn off ALL DC and AC loads
2. Ensure the "DC2DC" circuit breaker on the back of Archie is turned on.
3. Ensure the blue "Vehicle Input" plug is connected to Archie and the vehicle is running.
4. Hold the green “Reset” button on the back of Archie for 5-10 seconds.
5. Release and wait 10seconds
6. Power should now be restored and charging will commence
7. When the SOC (State of Charge) is above 20%, loads can be switched on if required
Storage
If you will not be using your Archie system for more than a week and will not be connected to vehicle or
solar charge it is recommended to turn off the 4 circuit breaker panels on the rear of Archie. This will reduce
standby current draw.
Battery Reset
Button
Breakers
