Enerdrive ePOWER 300W: ePOWER 500W Owner'S Manual Download Page 4

4

Enerdrive ePower 300w / 500w Inverter

1. INTRODUCTION

Thank you for purchasing the Enerdrive ePOWER Inverter. With our 
state of the art, easy to use design, this product will offer you reliable 
service for providing AC power for your home, boat, caravan, 4WD 
or commercial vehicle. The Enerdrive ePOWER Inverter can run many 
AC powered appliances when you need AC power anywhere. This 
manual will explain how to use this unit safely and effectively.  Please 
read and follow these instructions and precautions carefully.

2. IMPORTANT SAFETY INFORMATION

This section contains important safety information for the Enerdrive 
ePOWER Inverter. Each time, before using the Enerdrive ePOWER 
Inverter, READ ALL instructions and cautionary markings on or 
provided with the inverter, and all appropriate sections of this guide. 
The Enerdrive ePOWER Inverter contains no user serviceable parts. 
See Warranty section for how to handle product issues.

WARNINGS AND CAUTIONS

WARNING statements identify potential personal injury or loss of life 
situations.
CAUTION statements identify potential damage to equipment 
situations.

Both types of statements are denoted by the WARNING / 
CAUTION symbol and are placed on the left of the statement.

WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN 

RESULT IN DEATH OR SERIOUS INJURY

•  When working with electrical equipment or lead acid batteries, 

have someone nearby in case of an emergency.

•  Study and follow all the battery manufacturer’s specific 

precautions when installing, using and servicing the battery 
connected to the inverter. 

•  Wear eye protection and gloves.
•  Avoid touching your eyes while using this unit.

Summary of Contents for ePOWER 300W: ePOWER 500W





















Reviews: