background image

Enerdrive ePOWER 400W - 500W Owners Manual Rev: 2.0

Page 2

 

For safe and optimum performance, the Enerdrive ePOWER Inverter must be used properly. Carefully read 

and follow all instructions and guidelines in this manual and give special attention to the CAUTION and 

WARNING statements.

 

PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE

 Disclaimer
 

While every precaution has been taken to ensure the accuracy of the contents of this guide, Enerdrive 

assumes no responsibility for errors or omissions. Note as well that specifications and product functionality 

may change without notice.

 Important 
 

Please be sure to read and save the entire manual before using your Enerdrive ePOWER Inverter. Misuse 

may result in damage to the unit and/or cause harm or serious injury. Read manual in its entirety before 

using the unit and save manual for future reference.

 

Product Numbers

 

ePOWER True Sine Wave Series
•  Model: ePOWER 400w/12v - Enerdrive Part: EN1104S
•  Model: ePOWER 500w/24v - Enerdrive Part: EN1105S-24

 

Document Part Number 

 

ePOWER Inverter 400W/500W User Manual Rev 2.0

 

Service Contact Information

 

ENERDRIVE PTY LTD

 

Unit 11, 1029 Manly Road Tingalpa, Queensland, Australia 4173

 

Ph: 1300 851 535 Fax: 07 3390 6911

 

Email: [email protected]

 www.enerdrive.com.au 

Summary of Contents for EN1104S













Reviews: