P a g e
|
1
CONTENT
1. Components
2
2. Assembly
3
3. Operation
3
4. For your safety
4 - 5
5. Cleaning and storage
6
6. Specifications
6
7. Grounding instructions
6
8. Warranty
7
FRANÇAIS
11
1. COMPONENTS
1. Please empty the packing box thoroughly and make sure that all the parts are present and that there are no
missing parts.
2.
DO NOT PLUG THE UNIT IN UNTIL THE UNIT IS COMPLETELY ASSEMBLED AND MAKE SURE THERE IS NO
DAMAGE
to the unit and power cord.
3.
If you must use an extension cord, the cord should be at least NO .14 AWG and rated for no less than
1875 W
.
4.
For indoor and outdoor Use
IF THERE IS ANY DAMAGE OR MISSING PARTS, PLEASE CONTACT ENERG+ CUSTOMER SERVICE AT 866-967-
7333 ext. 227 (8:30 AM to 5:00PM Eastern time) or email us at:
2. ASSEMBLY
Parts
No.
Part Name
No.
Part Name
1
M6*20 Screw
7
Alum. Fixture
2
Washer
8
L Shaped Bracket
3
Base
9
M8*6 Screw
4
Base Cover
10
M4*6 Screw
5
Base Bracket
11
Control Panel
6
Stainless oval
washer
12
M6*16 Screw
1.
A cross type screwdriver (not included) is necessary for the installation. Take out the Allen Key from the packaging.
2.
Read this instruction manual carefully before installation and use. Keep this instruction manual in a proper and safe
place for future use in case needed.
Installation:
1.
Put the heater upside down (Fig.A). Slide the stainless oval washer (#2) onto the base bracket (#1).The mirrored
side should be upside down
2.
Slide the base cover and (#3) into the base bracket (#1)
3.
Slide the base (#4) into the base cover
Summary of Contents for HEA-14756
Page 1: ......
