47
External Alarm Setup
Alarm Input defines the way the connector responds to external input, in terms of whether it is normally open (NO), normally closed (NC), or they ignore the input.
The default is OFF.
The alarm input setup screen allows you to set these options:
Alarm Input
Alarm Input
OFF
Latch
OFF
Beep Time
00 SEC
Relay Time
00 SEC
Alarm Input
The Alarm Input that is displayed on the screen allows you to change the alarm input options.
Use the following steps to change the Alatm Input option:
Step
Action
1
Press or to move the cursor to Alarm Input.
2
Press or to select the new option.
•
OFF:
The alarm input is ignored.
•
NO:
The unit looks for a short for alarm condition.
•
NC:
The unit looks for an open for alarm condition.
3
Press MENU to go to the previous OSD window.
Latch
This option is used to determine how long the alarm message will display on the screen.
Step
Action
1
Press or to move the cursor to the alarm LATCH option.
2
Press or to select the new option.
•
ON:
The external alarm message disappears on screen after pressing the MENU button.
•
OFF:
The external alarm message remains on screen until alarm event is terminated (Default)..
3
Press MENU to go to the previous OSD window.
Beep Time
The Beep Time option allows you to select the time to sound the beep.
Use the following steps to change this option:
Step
Action
1
Press or to move the cursor to Beep Time.
2
Press or to select the time desired.
Beep Time can be set from 0 to 99 seconds.
3
Press MENU to go to the previous OSD window.
