7
EN
Control buttons on the remote control
Switch on monitor when at standby mode
or vice versa.
Press to mute the sound. Press again or press
VOL+ to unmute.
Menu selection
Press to increase / decrease
Press to bring up the main menu to the screen
and exit the current menu.
Press to cycle through the input source
in following:
VGA BNC HDMI
Press repeatedly to cycle through the available
video picture.
Inserting the batteries
Open the battery compartment cover on the back of the remote
control.
Insert one CR2032 3V battery with the correct polarity into the com-
partment. Please use only new batteries.
Close the compartment cover again.
Hold the remote control in the direction of the infrared sensor. The
distance to the monitor must not exceed 7 meters.
i
Note:
Please do not throw the used batteries into the household waste, but dispose of
them in an environmentally friendly manner at the appropriate collection points.
