4
IMPORTANT REMINDER
For outdoor applications, please seal carefully using the screws with the attached rubber washers.
Screws are supplied as part of accessories.
These holes (totally 4 holes) should be sealed well using screws with the attached rubber washers.
Screws are supplied as part of accessories.
• Dome / Window Care
Handle the dome carefully to prevent scratching. If a scratch appears on the dome cover, rotate the dome cover
so the scratch is out of the lens view.
• Power Supply
To avoid fire or shock hazard, must use a power supply, recommended by Videor.
• Monitor Impedance
Set the impedance switch to a 75 ohms standard position.
When monitor is set to high impedance mode, the picture will become blurred. In this case, just check the switch’s
position for monitor impedance.
CAUTION !
• Please keep dome cover and camera lens clean for better picture.
• To avoid smearing or blooming, do not expose the camera directly into a strong light source such as
sunlight or spotlights.
