0
5. 3-Axis Gimbal Adjustments
. First Pan:
Turning the first pan by hand for 360° rotation (see figure, No. ).
. Tilt:
Adjust the tilt to move up and down by hand (see figure, No. 4).
3. Second Pan: Loosen the pan screw (see figure, No. 3) to adjust the pan to desired angle (see figure, No. ), and
fix the screw (see figure, No. 3).
Second pan (No. )
Pan screw (No. 3)
Focus lever (No. 6)
Zoom lever (No. 5)
Tilt (No. 4)
First pan (No. )
6. Zoom & Focus Adjustment
. If you require to make focal / focus adjustments, pull the outer lever and make necessary adjustments.
. Pull out Zoom & Focus Levers, release and make the viewing angle / focus as shown.
• Field of View: Telephoto (T) to Wide (W)
• Focus: Near (N) to Infinity ( )
3. After the adjustments, fix Zoom & Focus Levers
and push the outer lever back in.
CAUTION: Unless the outer levers push back in properly,it touches inside the bubble and causes scratch.
Zoom lever
Focus lever
