7
4
Device Installation
Step 1
Open a package, take out the camera, unscrew the camera compression ring, and
disassemble the camera.
Step 2
Drill holes on the ceiling or wall, perform positioning of the position of the installation
block with the camera mounting base as reference template, and reserve the cable
entries of the video/power cables.
Figure 5-1 shows the dimension of the camera mounting base.
Figure 4-1
Dimension of the camera mounting base.
Step 3
Nail swell plastic buttons in to drilled holes, and fix the camera mounting base to the
ceiling (or wall) by use of self-tapping screws.
Step 4
Install the compression ring, the dome shell, and the dome shell fixed base on the
camera mounting base.
Figure 5-2 shows camera installation.