37
•
TRANSP:
Sets the transparency ratio of the mask frames
• MOSAIC:
Sets the mask frame mosaic to ON or OFF
6.1.12 MOTION DET
OFF / ON
Motion Detection is defined by rectangular areas. This gives a visual identification of motion areas.
• DETECT SENSE:
Sets the motion detection sensitivity
• BLOCK DISP:
ON / OFF / ENABLE status of the motion detection block display
ON: Make motion areas visible
OFF: Hide motion areas
ENABLE: Press enter
to access the „death band setting” screen, on-screen cursor,
moves in response to the inputs Left, Right, Up and Down to set the sensing area or dead
band for specified blocks. This allows you to specify and set an area of motion which is not
rectangular in shape. Press and hold SET button 3 seconds to exit.
• MOTION AREA:
ON / OFF Enable / Disable Area No.
• AREA SEL:
1/4, 2/4, 3/4, 4/4. Selects motion area number
TOP:
Set the top side of the monitoring frame selected by the AREA SEL parameter.
BOTTOM:
Set the bottom side of the monitoring frame selected by the AREA SEL parameter.
LEFT:
Set the left side of the monitoring frame selected by the AREA SEL parameter.
RIGHT:
Set the right side of the monitoring frame selected by the AREA SEL parameter.
