Eneo VKC-14140F2810IR, Full Manual

Page: 11 / 36

ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
11
Zoom & Focus adjustments
• Turn the Focus gear to “N”(Near) or
“∞”(Far) until the sharpest focus is
made.
• To widen the viewing angle, turn the
Zoom to “W”(Wide) and to obtain
a closer view, turn it to “T”(Tele)
Use the torque wrench supplied.
Installation and commissioning Instructions
• Make sure the power is removed before the installation.
• Follow the order for applying power.
First, connect the low voltage (AC24V or DC12V), then plug the AC adapter to
AC outlets to avoid an improper reset from power jitter and a damage from the
surge voltage when no load.
Power Supply Connections
Camera can work with either 24VAC or 12VDC, dual voltage power.
Primary and secondary grounds are completely isolated to avoid the possible
ground-loop problems.
VIDEO (BNC)
AC24V/GND (Black wire)
AC24V/DC12V (Red wire)
RTX- (Gray wire)
RTX+ (White wire)
※
Attach the Signal Assignment Sticker
in a visible spot for wiring reference.