Eneo VKC-1395, Full Manual, Page: 10 / 24

6FHQH6HOHFWIXQFWLRQ
This Camera system provide functions that enable users to easily adjust the image quality to suit
the image output device used.
%ULJKWQHVV
- Adjusts the brightness
&RQWUDVW
- Adjusts the image contrast (light and shade differences).
6KDUSQHVV
- Adjusts the apparent resolution
+XH
- Adjusts the hue
&RORU*DLQ
- Adjusts the intensity (brilliance) of the colors
(=220(OHFWURQLF=RRP
(=RRP
- ON / OFF
0$*
- Magnification rate = ZOOM (0~255)
3$1
- Horizontal position settings
7,/7
-Vertical position settings
',6'LJLWDO,PDJH6WDELOL]HU
Digital Image Stabilizer (DIS) function internally detects shaking of the image due to camera
shaking, and performs digital compensation processing inside the DSP to suppress this shaking
and stabilize the image output.
35,9$&<0$6.
The mask function hides one or more areas which the user does not want to be displayed on the
screen. This SET is capable of outputting 15 masks to the display. Each of these 15 masks can be
set with its own display area, color, darkness and mosaic processing.
$5($6(/
- Select mask area (1-15).
',63/$<
- Mask to ON or OFF
326,7,21
&2/25
- Sets the color blend:
RED/ GREEN/ BLUE/ YELLOW/ CYAN/ MAGENTA/ WHITE/ BLACK
75$163
- Sets the brightness blend ratio: 0%, /50%/75%/100%
026$,&
- Sets the mosaic to ON or OFF.
027,21'(70RWLRQ'HWHFWLRQ
By using the motion detection function, it is possible to create surveillance cameras which are
capable of detecting moving objects. The motion detection function identifies motion and outputs
motion information when the difference in brightness exceeds a specific level between frames(2VD).
'(7(&76(16(
Sets the motion detection threshold.
,17(59$/
Sets the MD detection interval. Subjects are detected when an interval exceeding the set number
of fields has elapsed from the previous motion detection.
%/2&.',63
Motion detection result frame display selection
Outputs the results of the motion detected in each block
0$6.$5($
MD (Motion Detection) setting menu, for setting the no-detection area.
The active point (MASK AREA 1~96) is displayed. Move the point with 4-arrow keys. Press
[ENTER] key is to finish edit point. (No-detection area)
021,725$5($
Sets the position of the monitoring frames in pixel or line increments
10